Technical Guidance
1.001 | Rules for the design of hoisting appliances (8 booklets – 1998) | |
1.004 | Recommendation for the calculation of wind loads on crane structures (2000) | |
1.005 | Recommendation for the calculation of tower cranes structures in out of service conditions (2003) | |
1.007 DE | Recommendation to maintain tower cranes in safe conditions (2003)-DE | |
1.007 FR | Recommendation to maintain tower cranes in safe conditions (2003)-EN | |
1.007 FR | Recommendation to maintain tower cranes in safe conditions (2003)-FR | |
5.004 | Rules for the design of the steel structures of general use (EN only – 1994) | |
5.005 | Lorry loaders; Definition, terminology and configurations (EN only – 1986) | |
5.006 | Lorry loaders; Controls, general principles, symbols, layout, operating directions (EN only – 1986) | |
5.007 | Lorry loaders; Stability, calculation and test loading (EN only – 1986) | |
5.008 | Stabilité - Chargeurs de camions utilisés pour la manutention du bois (EN uniquement - 1987) | |
5.010 | Stability – Lorry loaders used in timber handling (EN only – 1987) | |
5.011 | Lorry loaders; Load plates (EN only – 1987) | |
5.012 | Lorry loaders; Safety requirements for hydraulic systems (EN only – 1987) | |
5.013 | Mobile cranes; Wire ropes, drum and sheave diameters (EN and DE only – 1987) | |
5.014 | External Warning signals of the Rated Capacity Limiter, speed reductions and Event Recorder for mobile cranes (EN only – 2013) | |
5.015 | Chargeurs de camions ; Classification, charges et combinaison de charges (EN uniquement - 1990) | |
5.016 | Guideline – Safety Issues in Wind Turbine Installation and Transportation (FR – 2017) | |
5.016 | Guideline – Safety Issues in Wind Turbine Installation and Transportation (EN – 2017) | |
5.016 | Guideline – Safety Issues in Wind Turbine Installation and Transportation (DE – 2017) | |
5.016 | Guideline – Safety Issues in Wind Turbine Installation and Transportation IT – 2017) | |
5.018 | Event Recorder – Specifications – Mobile Cranes according to EN13000 (EN only – 2013) | |
5.020 | Guideline – “Hydraulic Hoses on Mobile Cranes” (EN only – Edition 2 – 2013) | |
5.022 | Guideline – Work at Height – Safety Measures (EN & FR) – 2015 | |
5.023 | Guideline – “Using Mobile Cranes for Pile Driving/Extraction” (EN only – 2014) | |
9.341 | Rules for design; Local girder stresses (1983) | |
9.511 | Rules for design; Classification of mechanisms (1986) | |
9.521 | Classification of Cranes & Lifting Equipment (2020) | |
9.661 | Dimensions and design of rope reeving components (1986) | |
9.671 | Rules for design; Chain qualities, selection criteria and requirements (1988) | |
9.683 | Selection of lifting and travel motors (1995) | |
9.751 | Power driven series hoist mechanisms, Safety (1998) | |
9.752 | Series hoists mechanisms with adjustable speed electrical power drive systems – Low voltage adjustable frequency AC power drive systems (2003) | |
9.755 | Measure for achieving safe working periods for motorised serial hoist units (S.W.P.) – 1993 | |
9.756 | Hand-operated and power driven hoists for special purposes (2004) | |
9.761 | Lifting force limiters for controlling the loading of motorised series hoist mechanisms (1995) | |
9.852 | Power driven series hoist mechanisms; Standardised test procedure for verification of the classification (1998) | |
9.901 | Rules for the design of series lifting equipment and cranes equipped with series lifting equipment (1991) | |
9.941 | Series lifting equipment; Graphical symbols for control devices (1995) |
4.004 EN | Periodic Inspection of Industrial Trucks (2019) | |
4.004 IT | Controllo Periodico dei Carrelli Industriali (2020) | |
4.005 | Industrial Trucks - 90° stacking aisle width (2017) | |
4.006 | Exceptional use of work platforms with Industrial Trucks (2017) | |
4.101 | Hour meter readings - terms and definitions for industrial trucks (2017) | |
4.102 | Foot and leg protection for pedestrian controlled battery powered trucks (2017) | |
4.103-1 | Warehouse floors (available for purchase under the reference FEM 10.2.14 | |
4.104 | Guidance on rough-terrain variable-reach tractors (2018) | |
4.107 | Classification of Attachments for Industrial Trucks (2021) |
2.111 | Illustrated terminology; mechanical handling of bulk material (1978) | |
2.112 | Continuous feeding of bulk materials (1999) | |
2.121 | Screw conveyors for bulk materials ? Recommendations for the design of horizontal and slightly inclined screw conveyors (1999) | |
2.122 | Recommendation for the calculation of throughput, power requirement and tensile forces in belts and chains of vertical bucket elevators (1981) | |
2.123 | Influence of the characteristics of bulk materials on the design of bucket elevators (1989) | |
2.124 | Influence of the characteristics of bulk materials on the design of troughed belt conveyors (1989) | |
2.125 | Influence of the characteristics of bulk materials on the design of horizontal and slightly inclined screw conveyors (up to about 20°) - 1989 | |
2.126 | Influence of the characteristics of bulk materials on the design of en-masse conveyors/elevators (1989) | |
2.127 | Influence of the characteristics of bulk materials on the design of vibrating conveyors (1989) | |
2.128 | Influence of the characteristics of bulk materials on the design of bucket-wheel reclaimers (1989) | |
2.131/2 | Rules for the design of mobile equipment for continuous handling of bulk materials (1997) | |
2.181 | Specific characteristics of bulk materials as applicable when handled mechanically (1989) | |
2.211 | Illustrated terminology; mechanical handling of unit loads (1978) | |
2.271 | Description of unit loads - Cardboard and millboard boxes (1981) | |
2.272 | Description of unit loads - Plastic boxes (1982) | |
2.273 | Description of unit loads - Flat pallets (1983) | |
2.274 | Description of unit loads - Paper, canvas and plastic bags (1985) | |
2.275 | Description of unit loads - Steel and plastic drums (1985) | |
2.276 | Description of unit loads - Luggage (1985) | |
2.311 | Storage of bulk materials - Terminology (1982) | |
2.312 | Discharge of bulk material from silos - Description and assessment of discharge systems (1999) | |
2.321 | Influence of the characteristics of bulk materials on the design and dimensioning of silos (1989) | |
2.371 | Definition of flow processes and troubles in the operation of storage silos (1991) | |
2.381 | Specific characteristics of bulk products as applicable to storage in silos - Determination and representation of flow characteristics (1986) | |
2.411 | Illustrated terminology; pneumatic handling of bulk material (1978) | |
2.412 | Glossary of general terms used in pneumatic handling of loose bulk materials (1981) | |
2.421 | Influence of the characteristics of bulk materials on the design of pneumatic handling systems (1992) | |
2.461 | Guarantee terms for pneumatic handling installations (1983) | |
2.481 | Specific characteristics of bulk products transported in pneumatic conveyors - Definition and determination of the methods of measurement (1997) | |
2.482 | Test method to determine the content of fines and streamers in plastic pellets (1999) | |
2.521 | Apron conveyors - Design principles (1995) | |
2.551 | Pressure release of dust explosions (2004) | |
2.561 | Questionnaire for the study of continuous bulk handling systems - Problems common to mechanical handling, pneumatic handling and silo storage (1994) | |
2.562 | Questionnaire and check-list for the study of continuous bulk handling systems - Mechanical handling - Specific part (1994) | |
2.563 | Questionnaire and check-list for the study of continuous bulk handling systems - Pneumatic handling - Specific part (1994) | |
2.564 | Questionnaire and check-list for the study of continuous bulk handling systems - Silos, hoppers and bins - Specific part (1994) | |
2.581/2 | Properties of bulk materials / General properties of bulk materials and their symbolization (1991) | |
9.001 | Terminology; Dictionary, storage and retrieval machines (2016) | |
9.101 | Terminology; Storage and retrieval machines - definitions (2016) | |
9.221 DE | Performance data of storage and retrieval machines, reliability, and availability (1981) | |
9.221 EN | Performance data of storage and retrieval machines, reliability, and availability (1981) | |
9.221 FR | Performance data of storage and retrieval machines, reliability, and availability (1981) | |
9.222 DE | Rules for the acceptance and availability of installations with storage and retrieval machines and other equipment (1989) | |
9.222 EN | Rules for the acceptance and availability of installations with storage and retrieval machines and other equipment (1989) | |
9.222 FR | Rules for the acceptance and availability of installations with storage and retrieval machines and other equipment (1989) | |
9.223 | Basic data and criteria for the construction of automatic high bay warehouses with distribution systems (2003) | |
9.311 DE | Rules for the design of storage and retrieval machines; Structures (1978) | |
9.311 EN | Rules for the design of storage and retrieval machines; Structures (1978) | |
9.311 FR | Rules for the design of storage and retrieval machines; Structures (1978) | |
9.512 DE | Rules for the design of storage and retrieval machines; Mechanisms (1997) | |
9.512 EN | Rules for the design of storage and retrieval machines; Mechanisms (1997) | |
9.754 DE | Safety rules for automatic miniload storage and retrieval machines (1988) | |
9.754 EN | Safety rules for automatic miniload storage and retrieval machines (1988) | |
9.754 FR | Safety rules for automatic miniload storage and retrieval machines (1988) | |
9.831 | Basis of calculations for storage and retrieval machines - Tolerances, deformations and clearances in the storage system Part 1: General, Single deep and Double deep Beam Pallet racking (EN, DE ? 2012) | |
9.832 DE | Basis of calculations for storage and retrieval machines, tolerances, deformations and clearances in automatic small parts warehouses (not silo design) ? 2001 | |
9.832 EN | Basis of calculations for storage and retrieval machines, tolerances, deformations and clearances in automatic small parts warehouses (not silo design) - 2001 | |
9.832 FR | Basis of calculations for storage and retrieval machines, tolerances, deformations and clearances in automatic small parts warehouses (not silo design) - 2001 | |
9.841 | Storage systems with rail-dependent storage and retrieval equipment - interfaces (2012) | |
9.842 | Rail dependent storage and retrieval systems - Consideration of accidental kinetic energy action in compliance with EN 528 (EN) - 2014 | |
9.851 | Performance data of storage and retrieval machines; Cycle times (2003) | |
9.860 | Guideline Cycle time calculation for automated vehicle storage and retrieval systems (2017) | |
9.865 | Energy consumption - determination methods (ECoDeMISE) - Calculation, measurement and evaluation methods of Intralogistics Systems and material handling equipment (2017) | |
9.871 DE | Logbook for storage and retrieval machines and transfer devices (1997) | |
9.871 EN | Logbook for storage and retrieval machines and transfer devices (1997) | |
9.871 FR | Logbook for storage and retrieval machines and transfer devices (1997) | |
9.881 DE | Project planning data for selection of drives for storage and retrieval machines (2000) | |
9.881 EN | Project planning data for selection of drives for storage and retrieval machines (2000) | |
9.881 FR | Project planning data for selection of drives for storage and retrieval machines (2000) |
12.001 | Practical guidance for the purchase of pre-owned MEWP (2019) | |
12.003 | Information & suitability for the task of exiting and/or re-entering at height | |
12.004 | Thorough examination of lift tables (5th edition - February 2019) | |
12.005 | Thorough examination of dock levellers (4th edition - February 2019) | |
12.006 | Safety on-around a vehicle loading area (2nd edition - February 2019) | |
12.007 | Guidance on dock leveller selection (2nd edition - December 2017) | |
12.008 | Vehicle restraining devices: safety and performance (June 2015) | |
12.009 | Ways to save energy in a Vehicle Loading Dock Area (October 2018) | |
12.010 | Standards summary (February 2019) | |
12.011 | Traffic lights functionality in a Vehicle Loading Dock Area (November 2020) | |
12.012 | Implement of machines in a loading area (February 2020) | |
12.013 | Major Inspections of Mobile Elevating Work Platforms | |
12.014 | Guidance on Dock shelters (October 2024) | |
2017-01 | Benefits of Registering Equipment with the Manufacturer |
10.2.03 | Guidelines for the safe provision of static steel racking and shelving, specifiers guidelines | |
10.2.04 | Guidelines for safe use of static steel racking and shelving, Users guide | |
10.2.06 | The Design of Hand Loaded Steel Static Shelving ***Partially superseded by Part 1 and Part 2 (see below)*** | |
10.2.06 | Part 1 - Design of Hand Loaded Low Rise Steel Static Shelving | |
10.2.06 | Part 2 - Design of Hand Loaded Steel Static Shelving | |
10.2.07 | Design of Drive In and Drive Through Racking: Design Code | |
10.2.08 | Recommendations for the Design of Static Steel Pallet Racking in Seismic Conditions | |
10.2.09 | Design of Cantilever Racking | |
10.2.10 | Storage systems with rail dependent storage and retrieval equipment - Interfaces | |
10.2.11 | Part 1 - Rail Dependent Storage and Retrieval Systems: Consideration of accidental kinetic energy action in compliance with EN 528. Pallet Racking | |
10.2.14 | Part 1 - FEM 4.103 Part 1 Warehouse floors | |
10.2.14 | Part 2 - Warehouse Floors | |
10.2.15 | Part 1 - Worked Example Adjustable Pallet Racking According to EN 15512: Unbraced Racking | |
10.2.16 | Design and Use of Rack Protection for Adjustable Pallet Racking | |
10.2.17 | Part 1 Worked Example Drive- In and Drive- Through Racking | |
10.2.17 | Part 2 Worked Example Drive- In and Drive- Through Racking | |
10.2.18 | The Design of Racking installed on Mobile Racking Bases | |
10.2.19 | The Design of Shuttle Racking | |
10.2.20 | Worked Example Design of Adjustable Pallet Racking in Accordance with EN 15512:2020 Revised October 2021 | |
10.3.01 | Part 1 - Tolerances, Deformations and Clearances in the Storage System |